No products in the cart.
Return To ShopWatch Database
Alpina 701
(Alpina Straub)
Ligne: 10.5'''
Jewels: 1/17
Power Reserve: 41 hrs
Frequency: 18000 vph
Type: Manual Wind
Period used: 1973-1974
Diameter: 23.7 mm
Height: 4.15 mm
Hands: 1.50 x 0.90 mm
The Alpina 701 watch movement, produced between 1973-1974, incorporates a pin-lever escapement. It features an indirect minute hand, with a hand friction clutch on the barrel. To release the stem, the crown needs to be strongly pulled while turned counter-clockwise. Similarly, to insert the stem, the crown must be strongly depressed while turned counter-clockwise. It should be noted that there are additional variants within this watch movement family, although detailed documentation is limited. The movements are typically signed with the designation of the most commonly produced variant, with attached codes for features in cases where the official designation is unknown. Notably, this movement functions as a manual wind mechanism.
The Alpina 701 features the following functions:
- Manual Winding
- Pin lever
Balance Staff Listing
| Ronda Reference # | Shock System | Buy |
|---|
Mainspring Listing
| Dimensions | GR Reference # | End Type | Buy |
|---|---|---|---|
| 1.50 x 0.080 x 240 x 7.0 mm | GR4076 | Manual | Buy mainspring |
Incabloc Part Listing
| Block # (Top/Bottom) | Cap Jewel # (Top/Bottom) | Spring # (Top/Bottom) |
|---|
KIF Part Listing
| Block # (Top/Bottom) | Cap Jewel # (Top/Bottom) | Spring # (Top/Bottom) |
|---|
Documents
Parts Listing
All watch database content © EmmyWatch LLC. Unauthorized redistribution of content is strictly prohibited. All rights are reserved.
